Woman-owned · Background-checked craftsmen · Work guaranteed in writing
Drywall Repair & Installation in Cedar Park, TX
From small holes to full sheet installation, Handyman Connection of Cedar Park handles drywall repairs and new work throughout Cedar Park, Leander, Round Rock and the surrounding area.
Free quote
Tell us what you need
Three fields. Our office follows up to schedule.
Drywall Repair and Installation in Cedar Park and the Surrounding Area
Whether you have a doorknob hole in a hallway, water-stained ceiling panels, or walls that need drywall hung from scratch, Handyman Connection of Cedar Park can take care of it. Our craftsmen are background-checked and experienced with every stage of drywall work, from framing and hanging to taping, mudding, texturing and paint-ready finishing. To get started with a free quote, call us at (512) 690-0505.
Homes in Cedar Park, Leander and the surrounding Hill Country communities see a wide swing in conditions throughout the year. Hot, dry summers followed by periods of heavy rain can cause walls and ceilings to shift slightly, which is a common reason nail pops and hairline cracks appear in drywall. Older homes may have tape seams that have separated over time, while newer construction sometimes needs patches after plumbing or electrical work is completed. Whatever the source of the damage, our craftsmen are familiar with the housing stock in this area and know how to get the repair looking right.
Good drywall work is mostly invisible when it is done well. The finish has to blend with the surrounding texture, whether that is flat, knock-down, orange peel or popcorn, and the surface has to be smooth enough to hold paint without shadows. We tape, mud and float seams properly, prime before texturing, and match the existing surface as closely as possible so the repaired area disappears into the wall.
What we do
Drywall Services We Offer in Cedar Park
Hole and crack repair
We patch holes of any size, from small nail holes to large openings left by plumbing or electrical work. The repair is framed, backed, patched, taped and finished to match the surrounding wall.
New drywall installation
We hang full sheets for new rooms, additions, garage conversions or remodeling projects. That includes measuring, cutting, securing and seaming the panels so they are ready for tape and mud.
Tape, mud and float
Properly taped and floated seams are what keep walls looking flat over time. We apply multiple coats of joint compound, feathering each one out so there are no ridges or bumps at the joints.
Texture matching
We match existing wall and ceiling textures including flat, knock-down, orange peel and popcorn. Getting the texture right is what makes a patch invisible once it is painted.
Nail pops and tape seam repair
Nail pops and separated tape seams are common in Texas homes as the ground shifts seasonally. We reset the fastener, re-tape where needed and refinish the area smoothly.
Wallpaper removal and drywall prep
We remove old wallpaper and repair the drywall underneath, which is often damaged in the process. The wall is then primed and finished so it is ready for paint or new wallcovering.
Why texture matching matters
Signs it is time
Signs Your Walls or Ceiling Need Attention
Nail pops or small bumps on the wall surface
In Texas, seasonal soil movement puts stress on wood framing, which pushes drywall screws or nails back through the surface. Left alone, they can grow into larger cracks over time.
Tape seams that are bubbling or lifting
Lifting tape usually means moisture got behind it at some point, or it was not bedded properly the first time. Once the tape releases it will continue to separate and needs to be re-done.
Staining or soft spots on the ceiling
A brown ring or soft area on a ceiling often points to a past or ongoing water leak. Even after the leak is fixed, the damaged drywall needs to be replaced and the area reprimed before painting.
Holes from repairs, moves or accidents
HVAC work, plumbing repairs, relocated outlets and doorknob impacts all leave holes that need proper patching. A correctly backed and finished patch will hold paint and not crack at the edges.
How it works
How a drywall project runs
- 01
Tell us what you need
Call (512) 690-0505 or send the quote form with a short description and a few photos. Our office calls you back to set up a time.
- 02
Walk-through and free quote
We look at the damage in person, check what texture the existing walls have, and give you a written quote before any work begins. There are no surprises at the end of the job.
- 03
Preparation and repair
We protect floors and nearby surfaces, then cut back any damaged drywall to solid material. For new installation we frame, measure and hang the panels before moving on to finishing.
- 04
Tape, mud, texture and prime
We tape seams and screw dimples, apply multiple coats of joint compound with proper drying time between coats, then apply texture to match the surrounding surface and prime the area before you paint.
- 05
Guaranteed in writing
A background-checked craftsman does the work and cleans up. Our workmanship is guaranteed for one year from the invoice date, and if a defect in our work shows up in that time we repair it free of charge.
Materials
Common Drywall Materials and Why They Matter
Drywall panels
Standard half-inch panels work for most walls and ceilings. Five-eighths-inch panels are used where fire resistance or additional rigidity is needed, such as garage walls. Moisture-resistant board is the right choice in bathrooms and laundry areas.
Joint compound
Also called mud, joint compound bonds tape to the drywall and fills seams and screw dimples. All-purpose compound is used for multi-coat work; lightweight compound is used for finish coats where a smoother surface and faster drying time are needed.
Primer
Priming before texture keeps the compound from absorbing moisture unevenly. Priming after texture and before the topcoat ensures paint lays flat and evenly across both repaired and original sections of the wall.
Cost
What affects the cost of drywall repair or installation
Size of the area
A small nail-hole patch takes far less time and material than replacing a full sheet or hanging drywall in an entire room. Larger areas also require more coats of mud and more texture work.
Texture complexity
Flat walls are the quickest to finish. Popcorn, knock-down and orange peel textures each require additional steps and sometimes specialized equipment, which adds to the time on the job.
Number of coats and drying time
Quality drywall finishing requires three or more coats of compound with adequate drying time between each. Jobs that need to be done in a single visit may not achieve the same level of finish as those that allow for proper cure time.
Accessibility
High ceilings or awkward spaces like stairwells take longer to work in safely and may require additional setup. That extra time is reflected in the quote before work begins.
Recent drywall work by the Cedar Park crew
Drywall across the surrounding area
We work in Cedar Park and every town in our service area, from our office in Leander.
Start here
Ready to get those walls looking right again?
Call Handyman Connection of Cedar Park at (512) 690-0505 or request a free quote online and we will schedule a walk-through at a time that works for you. Call (512) 690-0505 or request a quote online.
(512) 690-0505Monday: 8:00 AM – 5:00 PM · Tuesday: 8:00 AM – 5:00 PM · Wednesday: 8:00 AM – 5:00 PM · Thursday: 8:00 AM – 5:00 PM · Friday: 8:00 AM – 5:00 PM · Saturday: Closed · Sunday: Closed
Or send it in writing
Three fields, thirty seconds
Straight from Google